Metallux SA aus Mendrisio auf der COMPAMED 2021 in Düsseldorf -- COMPAMED Messe
Standverwaltung
Option auswählen

Metallux SA

Via Moree 12, 6850 Mendrisio
Schweiz

Kontaktdaten an Aussteller übermitteln

Übermitteln Sie dem Aussteller Ihre Kontaktdaten. Optional können Sie eine persönliche Nachricht ergänzen.

Bitte einloggen

Sie müssen angemeldet sein, um die Kontaktanfrage zu senden.

Ein Fehler ist aufgetreten

Bitte überprüfen Sie Ihre Internetverbindung oder versuchen Sie es zu einem späteren Zeitpunkt noch einmal.

Nachricht erfolgreich gesendet

Ihre Nachricht an den Aussteller wurde erfolgreich gesendet.

Hallenplan

COMPAMED 2021 Hallenplan (Halle 13): Stand A75

Geländeplan

COMPAMED 2021 Geländeplan: Halle 13

Unser Angebot

Produktkategorien

  • 01  Auftragsfertigung: Komponenten
  • 01.01  Electronic Manufacturing Services (EMS)
  • 01.01.03  Elektronikfertigung

Elektronikfertigung

  • 01  Auftragsfertigung: Komponenten
  • 01.02  Kunststoffverarbeitung
  • 01.02.01  Spritzgießen

Spritzgießen

  • 02  Endproduktefertigung
  • 02.09  Elektromedizingeräte

Elektromedizingeräte

  • 06  Elektrische Komponenten, elektronische Komponenten
  • 06.01  Sensoren
  • 06.01.04  Drucksensoren
  • 07  Mikrotechnik
  • 07.01  Mechatronik

Mechatronik

Unsere Produkte

Produktkategorie: Drucksensoren

ME790 - Piezoresistive Monolithic with signal conditioning

Metallux ME790 is a ceramic alumina monolithic pressure sensor working following the piezoresistive principle. The Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology and signal conditioning electronics are added to generate 0.5…4.5 V ratiometric output SMD directly on the sensor. Pressure and temperature calibration are done electronically with the SMD ASIC and can be performed in bar (ME790) or in psi (MEP790). Electronics provide offset and span correction when temperature changes. Aging detection and compensation are constantly performed. This new method guarantees good precision and long-term stability. The Metallux ME790 family meets EMI requirements. The ASIC stores production lot specific data for sensor traceability and allows custom calibration. Due to the excellent chemical immunity of the the Al2O3 ceramic, the ME790 sensors are suitable for nearly all aggressive media.

Mehr Weniger

Produktkategorie: Drucksensoren

ME501 - Piezoresistive Flush Membrane

Metallux ME501/ME505 pressure sensors are made with a ceramic base cell and a flush diaphragm and work following the piezoresistive principle. The Wheatstone bridge is screen printed on one side of the flush ceramic diaphragm which is, in turn, glued to the sensor’s body. The bridge faces the inside where a cavity is made and the diaphragm’s opposite side can therefore be exposed directly to the medium to be measured. Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. Metallux ME501/ME505 sensors are thermally compensated by laser adjustable PTC resistors and the use of ceramic ensures a high linearity across the entire range of measurement, reducing effects of hysteresis to a minimum.

Mehr Weniger

Produktkategorie: Drucksensoren

ME600 - Piezoresistive Monolithic

Metallux ME600 monolithic pressure sensors are made with a ceramic cell and work following the piezoresistive principle. The Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology. The diaphragm’s opposite side can be exposed directly to the medium to be measured. Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. Thanks to the reinforced outer area (monolithic structure), the sensor can be mounted directly in a plastic or metallic case by using O-ring. ME600 sensors are designed in such a way so that temperature changes and pressure overloads do not cause loss in reliability. Metallux ME600 sensors ensure optimal linearity across the entire range of measurement and minimize effects of hysteresis. Metallux ME600 family merges and substitutes ME662, ME663, ME651 and ME667 families.

Mehr Weniger

Über uns

Firmenporträt

Vision
Metallux SA provides an exclusive range of standard and custom pressure sensors as well as developing technologically innovative hybrid solutions for projects based on customer specifications. Thanks to the technical support of its engineering team, Metallux SA offers customers a consultancy, prototyping and testing service for high quality results.

Expertise
Metallux can assist customers at multiple points in the product design process including: Feasibility studies, Prototyping, Commercialization, Mass Production & Automation. With its global presence, Metallux offers standard pressure sensors with the option of customized solutions to meet specific customer requirements.  In addition, Metallux manufacturing technologies are specialized in micro-electronic assemblies and the ability to produce customized hybrid thick film circuits and COB applications.